IT Audit • Architecture Review • Risk Assessment

Understand the environment first. Then decide what is worth changing.

IT infrastructure evolves together with the organisation. New servers, networks, systems, cloud services, accounts, vendors and security solutions are added over time. Eventually, even simple questions become difficult to answer: what is critical, where are the real risks, and does the current architecture still meet the organisation's needs?

An IT audit by sLogic Group provides an independent view of your infrastructure, security, business continuity and key technology dependencies.

We do not stop at identifying problems. If the environment requires changes, we can also prepare the target architecture and a roadmap for its implementation.

Independent assessment

We assess the environment independently of who originally designed, implemented or supplied the technologies currently in use.

Risk and priorities

We separate critical issues from improvements that can be addressed later. We show the impact, priority and recommended action.

Architecture and roadmap

Recommendations can be translated into a target architecture and a phased modernisation or migration plan.

A good IT audit should not end with a list of problems. It should give the organisation a solid basis for making the right technology decisions.

Need an independent assessment of your IT environment?

We will review your infrastructure, security and key risks and, where required, prepare a target architecture as well.

Discuss your IT audit

When is an IT audit worth carrying out?

An audit does not have to be triggered by an outage or security incident. It is often the best starting point before an important technology decision.

The environment has grown over the years

The infrastructure works, but its architecture, documentation and standards have not kept pace with the organisation's growth.

A modernisation or migration is planned

Before buying new infrastructure, changing virtualisation platforms, building a Private Cloud or migrating to the cloud, it is worth defining the actual requirements first.

Security needs an independent review

The organisation wants to verify access controls, segmentation, MFA, hardening, monitoring, backup and service exposure.

Greater resilience is required

You need to understand which single failures could disrupt critical systems and how their impact can be reduced.

The IT provider or responsibility is changing

An independent review helps establish the actual state of the environment, access, backup and documentation before responsibility is transferred.

Preparing for NIS2 or regulatory requirements

A technical audit helps identify infrastructure and organisational gaps that require further action.

What does an IT audit cover?

The scope is tailored to the environment and the objective of the project. An audit can cover the entire IT landscape or selected areas that require an independent assessment.

Infrastructure and virtualisation

Servers, Linux and Windows Server, Proxmox VE, Hyper-V, storage, high availability, system lifecycle and resource utilisation.

Network and connectivity

Topology, routing, VLANs, segmentation, firewalls, VPN, redundancy, administrative access and network monitoring.

Cybersecurity and identity

Privileged accounts, MFA, hardening, patching, vulnerabilities, logging, SIEM, exposed services and access management.

Backup and Disaster Recovery

Backup scope, retention, off-site copies, separation, immutable backup, recovery testing, RPO, RTO and recovery readiness.

Monitoring and visibility

Monitoring of servers, networks, storage, backups, services and certificates, together with alert quality and escalation.

Processes and business continuity

Responsibilities, documentation, change management, incidents, vendors, access and concentration of knowledge in a single person.

Infrastructure and virtualisation audit

We assess not only individual servers and systems, but also the dependencies between them and the impact of a failure on the wider environment.

The review may include:

  • physical and virtual servers,
  • Proxmox VE, Hyper-V and other virtualisation platforms,
  • Linux and Windows Server systems,
  • local, network and distributed storage,
  • core infrastructure services,
  • redundancy and high availability,
  • system and software lifecycle,
  • performance and resource utilisation,
  • single points of failure.

Network audit

The network is the foundation of the entire environment. We assess whether its architecture provides appropriate segmentation, security, redundancy and operational predictability.

  • topology and routing,
  • VLANs and segmentation,
  • firewalls and access rules,
  • VPN and remote access,
  • administrative access,
  • device and link redundancy,
  • wireless networks,
  • network infrastructure monitoring.

Cybersecurity and identity audit

Not every security issue requires a penetration test. In many environments, the most significant risks result from architecture, configuration, excessive permissions or insufficient visibility of security events.

  • administrative and privileged accounts,
  • MFA and authentication policies,
  • access management,
  • publicly exposed services,
  • system hardening,
  • patch and update management,
  • vulnerabilities and legacy components,
  • network segmentation,
  • centralised logging,
  • SIEM and security monitoring.

Backup and Disaster Recovery audit

The fact that “backup is running” does not answer the most important question: can critical services actually be restored within the required timeframe after a real failure?

We verify areas including:

  • scope of protected data,
  • backup frequency,
  • retention,
  • off-site copies,
  • separation of the backup environment,
  • immutability mechanisms,
  • administrative permissions,
  • backup job monitoring,
  • recovery testing,
  • RPO and RTO,
  • Disaster Recovery readiness.

Monitoring and environment visibility

One of the fundamental questions during an audit is: does the organisation know about a failure before a user reports it?

We review monitoring of servers, networks, storage, services, backups, certificates, logs and security events. We also assess alert quality, escalation processes and whether monitoring provides enough information to support effective action.

Processes, responsibility and business continuity

Not every risk is technical. Even well-designed infrastructure can be vulnerable if the organisation lacks documentation, clearly defined responsibilities or access to critical systems.

  • ownership of systems and services,
  • change management,
  • onboarding and offboarding,
  • incident handling,
  • vendor management,
  • environment documentation,
  • administrative access,
  • concentration of knowledge in one person or provider.

IT audit and IT architecture — two different stages

Current state

IT Audit

Answers the question: where are we now? It identifies the current state, risks, dependencies and issues that need improvement.

Target state

IT Architecture

Answers the question: where should we be? It defines the target infrastructure model and the direction of future modernisation.

The architecture design may cover server infrastructure, Private Cloud, virtualisation, storage, networking, high availability, backup, Disaster Recovery, monitoring, identity management and cybersecurity.

We do not assume that the right answer is always cloud, a specific vendor or a complete infrastructure replacement. We select technology to meet requirements — not requirements to fit technology.

Single Points of Failure

A key part of the assessment is identifying areas where a single failure could cause significant disruption.

Infrastructure

A single server, storage array, firewall or other device without redundancy or a viable recovery path.

Connectivity

A single Internet connection, communication path or network component critical to service availability.

Data

Production data and its only backup located within the same site or failure domain.

Knowledge and access

A single person or provider holding all administrative access and knowledge of the environment.

Not every Single Point of Failure must be removed immediately. The important part is understanding the risk, business impact and cost of reducing it.

Not every issue is critical

A report where every finding receives the highest priority does not help an organisation make decisions. We classify findings based on their risk and business impact.

Priority 1

Critical

Risks that may result in data loss, a serious security incident or prolonged unavailability of critical services.

Priority 2

High

Significant issues that should be addressed within a short timeframe.

Priority 3

Medium

Issues that should be addressed but generally do not require immediate action.

Priority 4

Optimisation

Recommendations that improve performance, security, predictability or long-term maintainability.

What do you receive after the audit?

Executive Summary

Key risks and recommendations presented in a form suitable for business and management decision-making.

Technical report

A detailed description of the current state, identified issues, their impact and recommended actions.

Risks and priorities

A clear distinction between urgent actions, planned improvements and longer-term optimisation.

Technology roadmap

A recommended sequence of changes based on risk, technical dependencies and organisational capabilities.

Target architecture

If the project includes architecture work, we prepare assumptions for the future environment and its key dependencies.

Migration plan

For larger changes, we can define the stages required to move from the current environment to the target solution.

30 / 60 / 90-day roadmap

0–30 days

Reduce the biggest risks

Administrative access, backup, critical vulnerabilities and issues that could lead to data loss or service unavailability.

30–60 days

Stabilisation

Monitoring, updates, documentation, segmentation, redundancy and improvement of core operational processes.

60–90 days

Modernisation and development

Architectural changes, automation, cost optimisation and improvements to the long-term resilience of the environment.

The roadmap is not a rigid schedule. Priorities are based on risk, technical dependencies, organisational capabilities and available budget.

How does the IT audit and architecture review work?

01

Objectives and scope

We define the environment, critical services, key concerns and the decisions the assessment should help support.

02

Technical assessment

We review architecture, configurations, documentation, monitoring and other agreed sources of information.

03

Risk and dependencies

We identify issues, Single Points of Failure and dependencies with the greatest impact on security and availability.

04

Recommendations and architecture

We define corrective actions and, where included in scope, design the target solution.

Why sLogic Group?

Technical depth

We look at the environment as a whole: systems, virtualisation, networking, storage, backup, monitoring, cybersecurity and identity.

Risk-based approach

We do not measure audit quality by the number of findings. We focus on risks that have a real impact on the organisation.

Vendor-neutral

We do not use an audit as an excuse to sell a specific vendor or replace infrastructure that does not need replacing.

Security by design

Security, monitoring, access control and recoverability are treated as part of the architecture from the beginning.

From recommendation to implementation

We can design and implement the recommended changes, or prepare documentation that your internal team or another provider can use.

Discuss your project

Frequently asked questions

What is an IT audit?

An IT audit is an independent assessment of an organisation's infrastructure, security, processes and technology risks. Its result should include not only identified issues, but also priorities and recommended actions.

What is the difference between an IT audit and architecture design?

An IT audit describes the current state and identifies risks. Architecture design defines the target state of the infrastructure and the direction of future modernisation. Both stages can be delivered together or independently.

Is an IT audit the same as a penetration test?

No. A penetration test focuses on actively identifying ways to bypass security controls. An IT audit has a broader scope and may include infrastructure, architecture, configuration, backup, networking, access, monitoring and processes.

Does the audit include the network?

Yes, if it is included in the agreed scope. We can assess topology, routing, VLANs, firewalls, VPN, redundancy, segmentation and administrative access.

Does the audit include backup?

Yes. We can assess backup scope, retention, separation, off-site copies, protection mechanisms, monitoring, recovery testing, RPO and RTO.

Can you design a new infrastructure architecture?

Yes. An audit can be the starting point for modernising infrastructure, Private Cloud, virtualisation, networking, backup, Disaster Recovery, monitoring or cybersecurity.

Can you audit only one area?

Yes. The scope can cover the entire environment or a selected area such as infrastructure, network, backup, monitoring or cybersecurity.

Can we implement the recommendations ourselves?

Yes. The documentation can be used by your internal IT team or another provider. If required, sLogic Group can also design and implement the agreed changes.

How long does an IT audit take?

It depends on the number of systems, locations and devices as well as the scope of the assessment. Before the project starts, we define the scope and delivery approach.

How much does an IT audit cost?

The cost depends on the size of the environment, technical scope and expected level of detail. After an initial assessment, we provide a defined scope of work and quotation.

Do not guess the condition of your infrastructure.

Get an independent view of your environment, security and key risks. If changes are required, we can also prepare the target architecture and implementation plan.

Discuss your audit or architecture