MikroTik is a flexible networking platform used by businesses, data centers, service providers, branch offices, and distributed environments. It combines routing, firewalling, VPN, bandwidth management, multi-WAN support, and wireless networking within one consistent system.

At SLogic Group, we design, implement, and administer environments based on MikroTik devices and RouterOS. We build both small business networks and more advanced solutions covering multiple locations, dynamic routing, connection redundancy, VPN tunnels, and centralized management.

MikroTik offers extensive freedom in network design — provided that the configuration is based on a well-planned architecture rather than a collection of randomly added rules.

Routing, security, and network management

MikroTik in business environments

MikroTik devices can act as the main router, edge firewall, VPN concentrator, switch, wireless controller, or part of service provider infrastructure. The wide product range makes it possible to choose a platform for both a small office and an environment with significantly higher requirements.

The device itself does not guarantee stability or security. The network design, segmentation, firewall rule order, administrative access control, monitoring, and preparation for link or hardware failure are equally important.

Routing

We design static and dynamic routing, communication between VLANs, routing between locations, and route selection policies.

Firewall

We create structured access rules, device protection, traffic filtering, and mechanisms that limit unauthorized connections.

VPN

We implement secure connections between branch offices, data centers, remote employees, and cloud-based resources.

VLAN and Segmentation

We separate users, servers, IoT devices, telephony, guest Wi-Fi, monitoring systems, and administrative infrastructure.

Multiple Internet Connections

We configure failover, traffic balancing, and monitoring of service provider availability.

Wireless Networks

We deploy MikroTik access points, centralized configuration management, and separate networks for employees and guests.

Our MikroTik expertise

We can design a new environment, organize an existing configuration, migrate from other vendors, or take over ongoing network administration.

  • design of MikroTik-based network architecture,
  • selection of routers, switches, and access points,
  • installation and configuration of RouterOS,
  • configuration of interfaces, bridges, bonding, and VLANs,
  • static and dynamic routing,
  • configuration of OSPF and BGP,
  • creation of firewall and NAT rules,
  • implementation of WireGuard and IPsec tunnels,
  • configuration of remote-access VPN for employees,
  • interconnection of branch offices and data centers,
  • support for multiple Internet links,
  • failover and traffic balancing,
  • traffic and bandwidth management,
  • configuration of DHCP, DNS, and network services,
  • deployment of Wi-Fi networks and CAPsMAN,
  • integration with RADIUS and centralized authentication,
  • monitoring of device availability and performance,
  • automation of configuration and backup processes,
  • RouterOS and RouterBOOT updates,
  • documentation of configuration and network topology.
RouterOS

One platform, many network functions

RouterOS is the operating system used by MikroTik devices. It enables routing, firewalling, VPN tunnels, switching, wireless networking, traffic queues, and many supporting services to be managed from one environment.

The broad range of available functions provides extensive flexibility, but it also requires proper organization. We maintain consistent naming, comments, configuration structure, backups, and documentation so that the environment remains manageable even after several years.

Flexible Configuration

RouterOS allows the device to be adapted to the company’s architecture instead of limiting it to a few predefined scenarios.

Wide Device Range

The platform includes devices for small offices, branch networks, wireless environments, data centers, and service providers.

Automation

Configuration can be extended using scripts, schedulers, APIs, and external automation systems.

Static and dynamic routing

MikroTik can support both simple static routes and advanced environments using dynamic routing protocols. We select the right approach based on the number of locations, available service providers, redundancy requirements, and the way services are published.

Static Routing

A good choice for simpler environments where the topology is stable and the number of routes is limited.

OSPF

We use OSPF for automatic route exchange in larger networks between routers, locations, and infrastructure layers.

BGP

We configure BGP for multi-provider environments, owned IP address space, data centers, and networks requiring control over route exchange.

Policy-Based Routing

We direct selected traffic through specific links, gateways, or tunnels according to organizational requirements.

Route Filtering

We control which prefixes may be received, advertised, and installed in routing tables.

Route Redundancy

We design alternative communication paths and automatic failover when the primary route becomes unavailable.

Network segmentation

VLANs and controlled traffic flow

A flat network in which all devices share one segment makes access control more difficult and increases the potential impact of a security incident. MikroTik makes it possible to create logical networks and precisely define how they may communicate with one another.

Users

We separate employee computers from servers, management systems, technical devices, and publicly available services.

Servers

We create separate segments for production systems, databases, backup, replication, and management.

Guest Wi-Fi

We provide Internet access without allowing communication with internal company resources.

IoT Devices

We isolate cameras, televisions, automation systems, and other devices with a limited trust level.

Telephony

We separate VoIP traffic and can apply rules that improve its predictability and priority.

Management

We restrict access to administrative panels, management interfaces, and infrastructure devices.

Firewall and access security

The MikroTik firewall controls both traffic passing through the router and connections directed to the device itself. We design rules according to the principle of least privilege — only connections that are genuinely required are permitted.

  • protection of administrative access to the router,
  • restriction of services available from the Internet,
  • traffic filtering between VLANs,
  • control of user access to servers,
  • protection against basic scans and access attempts,
  • address lists and dynamic grouping of traffic sources,
  • rules limiting automated login attempts,
  • NAT and publication of selected services,
  • logging of relevant events,
  • restriction of management access to trusted addresses or VPN networks.

A secure MikroTik configuration should protect not only the network behind the router, but also the device that controls the traffic.

Secure communication between locations

VPN on MikroTik devices

VPN tunnels provide secure connections between branch offices, remote employees, data centers, and resources hosted by different providers. We select the tunnel technology based on requirements, device compatibility, and expected performance.

WireGuard

We implement modern, efficient tunnels for remote users and site-to-site connections.

IPsec

We configure connections compatible with MikroTik devices and solutions from other vendors.

Site-to-Site

We connect offices, warehouses, data centers, server rooms, and cloud environments into one controlled network.

Employee Access

We provide secure access to company systems from computers and mobile devices.

Routing Through Tunnels

We combine VPN with static or dynamic routing to support more advanced topologies.

Restricted Access

VPN users receive access only to the systems and services required for their work.

Support for multiple Internet connections

MikroTik can manage several Internet connections and respond when one provider becomes unavailable. Detecting only an active interface is not always sufficient, so we also monitor access to resources located beyond the provider’s network.

Failover

If the primary connection fails, traffic can be redirected automatically through a backup link.

Load Balancing

We distribute selected connections across available links according to their parameters and intended use.

Link Quality Monitoring

We monitor availability, latency, and packet loss so that failover is triggered by an actual service problem.

Different Routes for Services

Selected systems or user groups can use a specific provider or tunnel.

LTE or 5G Backup Link

We can use a mobile network as an additional access channel during a primary provider outage.

Failure Notifications

We integrate monitoring with alerts informing the team about failover, link loss, or degraded connection quality.

MikroTik wireless networks

Wi-Fi and centralized CAPsMAN management

In environments using multiple access points, centralized management simplifies the maintenance of a consistent configuration. CAPsMAN makes it possible to manage wireless settings from one place.

  • design of access point placement,
  • central management of network names and security settings,
  • separate wireless networks for employees and guests,
  • assignment of wireless networks to VLANs,
  • consistent configuration across multiple access points,
  • user access control,
  • integration with RADIUS,
  • monitoring of access point availability,
  • configuration updates and development,
  • analysis of coverage and performance issues.

Bandwidth and traffic quality management

In networks with shared bandwidth, a single user, backup job, or large transfer can affect the performance of other services. MikroTik allows traffic to be classified, limited, and prioritized.

Bandwidth Limits

We limit maximum bandwidth for selected users, networks, or traffic types.

Priorities

We assign higher priority to services that require stable transmission, such as telephony or critical applications.

Control of Large Transfers

We reduce the impact of backups, synchronization, and large downloads on everyday user activity.

Stability and business continuity

Device and gateway redundancy

The main router can become a single point of failure. In environments requiring higher availability, we design redundancy for devices, gateways, and connections.

  • redundant edge routers,
  • virtual gateway for endpoint devices,
  • automatic traffic takeover after a failure,
  • redundant Internet links,
  • alternative routes between locations,
  • configuration synchronization and control,
  • monitoring of both devices,
  • testing of failure scenarios.

The achievable level of redundancy depends on the architecture, features in use, and expected recovery time. We design the solution to avoid apparent high availability in which hidden single points of failure still remain.

Monitoring of MikroTik devices

Routers and switches are critical components of the entire infrastructure. Monitoring should cover not only availability, but also resource usage, interface status, link quality, and configuration-related events.

Device Availability

We verify that routers, switches, and access points are responding and operating correctly.

Interfaces and Traffic

We monitor port status, bandwidth utilization, transmission errors, and sudden changes in traffic volume.

Device Resources

We monitor processor load, memory usage, temperature, and available storage.

VPN Tunnels

We verify tunnel availability and communication with networks on the other side of the connection.

Routing Sessions

We monitor OSPF neighbor status, BGP sessions, and the availability of critical routes.

Internet Links

We monitor provider availability, latency, packet loss, and failover events.

Configuration backup and management

A configuration backup enables faster device recovery after a failure, incorrect change, or hardware replacement. The backup itself should be stored securely outside the device and supported by proper environment documentation.

  • automatic configuration backups,
  • configuration export in text format,
  • secure storage of backups outside the device,
  • change versioning,
  • documentation of interfaces, VLANs, and IP addressing,
  • description of firewall rules and routing dependencies,
  • controlled RouterOS updates,
  • recovery plan for replacement hardware.

Router configuration is part of the company’s critical documentation. Its only copy should not remain on the device whose failure may disconnect the entire network.

Structured migration

Migration to MikroTik

Moving a network from another vendor’s device requires recreating not only the addressing and rules, but also the actual operating logic of the environment. We do not copy configurations mechanically — we analyze their purpose and adapt the solution to RouterOS capabilities.

  • we inventory the current configuration,
  • we analyze routing, NAT, firewall rules, VLANs, and tunnels,
  • we identify unused and insecure rules,
  • we prepare the MikroTik device configuration,
  • we create cutover and rollback plans,
  • we test communication before migration,
  • we switch devices and links during the agreed maintenance window,
  • we verify access to services, the Internet, and remote locations,
  • we monitor the environment after migration,
  • we prepare post-implementation documentation.

MikroTik configuration audit

An existing device may have been operating for years while still containing obsolete rules, unused accounts, exposed services, or a configuration that no one fully understands anymore. An audit helps organize the environment and reduce risk before a failure or incident occurs.

Administrative Access

We review accounts, permissions, available management services, and the sources from which the device can be accessed.

Firewall and NAT

We analyze rule order, purpose, logging, and services that may have been exposed unintentionally.

Routing

We verify routes, failover mechanisms, routing filters, and potential asymmetric communication paths.

Updates

We check the RouterOS version, update channel, RouterBOOT version, and the possibility of safely upgrading the device.

Configuration Backup

We verify the availability of current backups and the ability to restore the device after a failure.

Documentation

We compare the configuration with the network diagram, IP addressing plan, and description of active connections.

Flexible cooperation model

How can we support your MikroTik environment?

Design and Deployment

We select devices, design the network, and prepare the complete RouterOS configuration.

Audit and Optimization

We analyze the existing configuration, identify risks, and implement agreed improvements.

Migration

We migrate routing, VLANs, VPN tunnels, and security rules from the current solution.

Ongoing Administration

We monitor devices, perform backups, install updates, and develop the configuration as the company network grows.

How do we begin working together?

  • We assess the environment – we analyze locations, devices, IP addressing, providers, and active services.
  • We define the requirements – we determine the expected level of security, availability, and performance.
  • We design the solution – we prepare the topology, segmentation, routing, VPN, and access policies.
  • We configure the devices – we implement the prepared settings and integrate MikroTik with the remaining infrastructure.
  • We test the environment – we verify routing, access to services, tunnels, failover, and security mechanisms.
  • We provide documentation – we describe the topology, addressing, key rules, and emergency procedures.
  • We provide ongoing support – we monitor, update, and develop the environment as organizational needs change.

MikroTik devices and solutions

RouterBOARD

Routers for businesses, branch offices, remote locations, and environments requiring flexible configuration.

Cloud Core Router

High-performance devices for data centers, service providers, larger networks, and advanced routing.

Cloud Router Switch

Switches with RouterOS or SwOS functionality used in access, aggregation, and server network layers.

Wireless Devices

Access points, outdoor wireless devices, and solutions for building centrally managed Wi-Fi networks.

LTE and 5G

Devices for building primary or backup Internet connections using mobile networks.

CHR

A virtual edition of RouterOS designed for virtualization platforms and cloud environments.

Do you need a new MikroTik deployment or help organizing your existing environment?

We will assess your network, select the right devices, and prepare a configuration that provides secure routing, stable connectivity, and room for future infrastructure growth.

Contact Us